Zeo Fire Resistant
Scope
Fire and flame resistant
Frost resistant
Resistant to corrosion, erosion and cracking
Resistant to compression, tension and cracks
Resistant to mold, parasites, germs, salts, sulfates and oxidants
Resistant to mechanical shocks
Low contraction factor
Thermal insulator
Soundproof
Ready to use and fast to apply
Eco-friendly / does not cause irritation or allergy and does not emit harmful substances
Packaging: 25 kg / liter
Data sheet
Ready to use thermal soil on all concrete surfaces, metal structures and corrugated metal roofs. Used as an adhesive for fire resistant bricks in its various uses; for ovens, fireplaces and metal smelting ovens.
Made of materials that are high in resisting fire and flames.
|
All construction surfaces
|
Use
|
|
Up to º1450
|
Fireproof
|
|
UP TO 5%
|
Moisture absorption &adsorption
|
|
0.26 W/M.K
|
Thermal conductivity
|
|
Can reach up to 2 DB per 1 cm
|
Sound absorption
|
|
No Asbestos No Formaldehyde
|
Eco-friendly
|
|
7.5≤N cm/²
|
Compressive strength
|
|
- Fire-reaction rating A1 according to EN 13501 – 1
-Tested according to EN 13381 – 3 / EN 13381 - 4 / EN 13381 - 5
-European Technical Assessment ETA 10 / 0082
|
Certifications
|
|
RED
|
Color of fire resistance plaster
|
|
1.2 kg m²
|
Dry density
|
|
E736. 200 psf (9.6 kPa) 339 psf (16.2 kPa)
|
Power Association
|
|
|
|
|
Can be stored up to 24 months in a dry place.
|
Storage
|
|
|
SIO2
|
AL2O3
|
Fe2O3
|
MGO
|
Ca(OH)2
|
CAO
|
TIO2
|
Cement ceramics
|
|
Chemical composition
|
Usage instructions:
• Empty the bag and add fresh water and mixing until the mixture is homogenized and moisten the place of pouring.
The data contained in these technical data sheets refer to laboratory tests. The indications and methods indicated may be subject to changes over time depending on possible improvements in production technologies. The application of the products takes place outside of our control, being unable to intervene directly on the conditions of the construction sites and the execution of the works. All indications are of a general nature, do not bind our company in any way and therefore the responsibility falls exclusively on the customer. We recommend a preliminary test of the product in order to check its suitability for the intended use. The technical service is available to provide additional information
Produced by green buildings company for insulation blocks and light weight concrete
Amman - Jordan
